ASCO電磁閥的分布直動式:它是一種直動式和先導式相結合的原理。當入口與出口沒有壓差時,通電后電磁力直接打開先導孔連接主閥活塞依次向上提起,閥門打開;當入口與出口達到啟動壓差時,通電后,電磁力先打開先導孔,主閥活塞上腔壓力下降,從而利用壓差和電磁力拉動主活塞,閥口打開;斷電時,靠彈簧復位關閉先導孔,主活塞上腔增壓,推動主活塞向下移動,閥關閉。常開式與常閉式相反。
ASCO先導式快速排氣閥,3通-8317 8321系列-快速排氣先導式 接口:1/4-3/8(單位:英寸),材質:黃銅、不銹鋼,壓力:1-14公斤(zui高值
標稱環境溫度。范圍
AC:32°F至125°F(0°C至52°C)
DC:32°F至104°F(0°C至40°C)
電磁閥 - 3路:3/2 - ASCO系列317
先導式 - 常閉,常開 - 1/4至3/8 - 黃銅,不銹鋼 - 空氣:惰性氣體,水,輕質油,天然氣
設計用于通過排氣口快速排氣至0 psi
有彈性的座墊可供緊密關閉
在低功耗,本質安全,電壓測量和惡劣環境建設也可用
隔膜提升閥,適用于控制空氣,惰性氣體和液體
大通徑,大流量
能用于控制大型執行機構,能快速關閉大型控制閥
彈性體閥座,密閉性好。
可任意位置安裝
SCG531C001MS,220/50
SCG531C001MS,230/50
SCG531C001MS,dc24v
SCG531C001MS-24VDC
SCG531C002MS 220V--230/50
SCG531C002MS 220VAC
SCG531C002MS 230VAC
SCG531C002MS 24DC
SCG531C017MS
SCG531C017MS 220VAC
SCG531C017MS AC220V
SCG531C017MS-24VDC
SCG531C018MS 220VAC
SCG531C018MS AC220V
SCG531C018MS DC24V
SCG531D001MS
SCG531C001MS 24V
SCG531D002MS 220V
SCG531C002MS,230/50
scG551 A001 MS
SCG551A001MS
SCG551A001MS 24VDC
SCG551A001MS 220AC
SCG551A001MS 220VAC
SCG551A001MS 230/50
SCG551A001MS 230VAC
SCG551A001MS 24V
SCG551A001MS 24VDC
SCG551A001MS AC220
SCG551A001MS AC220V
SCG551A001MS DC24V
SCG551A001MS, 115Vac
SCG551A001MS,230/50
SCG551A001MS,24DC
SCG551A001MS,DC24V
SCG551A002MS 220V
SCG551A002MS 230VAC
SCG551A002MS 230VAC
SCG551A002MS 24V
SCG551A002MS 24VDC
SCG551A002MS 電壓24VDC
SCG551A005 24DC
SCG551A005MS 220VAC
SCG551AO18MS AC24V /50
SCG551B401MO AC220V
SCG551B405MO 48vDc
SCG553A001MS 24VDC